Ndubata
ASTM A106 prọ ọkpọkọ bụ enweghị ụkwụ carbon na-enweghị atụ maka ọrụ okpomọkụ dị elu. Igwe ejiji, onye na-eme ihe na-eduga ASTM A106 ọkpọ ọkpọ, na-enye ngwaahịa dị elu na arụmọrụ dị mma. Isiokwu a na-enye nkọwa zuru ezu banyere imepụta ihe nrụpụta, usoro mmepụta zuru oke, usoro ọgwụgwọ, ihe akụrụngwa, ihe ndị mejupụtara na mpaghara ASTM A106 chara ígwè.
Iche iche
ASTM A106 Ígwè igwe na-emepụta site na ígwè na-esochi ya:
- dayameta mpụta: 1/2 inch ruo 36 (21.3mm ruo 914.4mm)
- ọkpụrụkpụ mgbidi: 2.77mm ruo 60mm
- Ogologo: 5.8m ruo 12m (kpụrụ)
Usoro mmepụta
Egwuregwu igwe na-eji usoro nrụpụta na-acha na-enweghị mmiri ma ọ bụ nke na-adịghị adọrọ adọrọ iji mepụta ASTM AS16. Usoro a gụnyere:
1. Na-ahọpụta akụrụngwa dị elu
2.
3
4.
5. Ọgwụ ọkụ iji melite akụrụngwa arụmọrụ
6. Ọrụ imecha iji nweta ogo ikpeazụ na elu elu
Ọgwụgwụ elu
Astm a10 ígwè ígwè nke Anth putara site na akpukpo aru nke oma, tinyere:
- eserese ojii
- Achịcha varnish
- Galvaning
- A mgbochi corrosonion mkpuchi
Nkwakọ ngwaahịa na njem
ASTM a106 ígwè ígwè mechara site na omume ahụhụ na-abụkarị ngwakọta ma ọ bụ kọmputa maka njem. Enwere ike ịnwe ihe na nkwakọ ngwaahịa pụrụ iche.
Underkpụrụ ule
A na-anwale ọkpọkọ nke ASTM A106 na-emepụta site na a na-ahụ anya dị ka ụkpụrụ ndị a:
- ASTM A450 / Ash50m: nkọwapụta ọkọlọtọ maka ihe niile achọrọ maka carbon na obere eriri eriri
- ASTM A106 / A106m: Nkọwapụta ọkọlọtọ maka ọkpọkọ carbon na-enweghị atụ maka ọrụ dị elu
Ihe mejupụtara kemịkal
Ihe mejupụtara kemịkal nke ASTM A106 ọkpọ ọkpọkọ nke Anish steel nke bụ:
- carbon (c): 0.25% max
- Manganese (mn): 0.27-0.93%
- phosphorus (p): 0.035% max
- Sulfur (s): 0.035% max
- silicon (si): 0.10% min
- chromium (cr): 0.40% max
- ọla kọpa (cu): 0.40% max
- Nickel (NI): 0.40% Max
- Molybdemum (mo): 0.15% max
- Vanadium (v): 0.08% max
Ngwongwo nke mebere
Njirimara nke ASTM A106 ígwè ígwè emepụtara site na omume ahụhụ site na ndị a:
- Ike Tenle: 415 Min
- Ruo ike na - ike: 240 Min
- Elongation: 30% min
Nnyocha nyocha
ASTM a106 gwọọ ígwè met ígwè na-emepụta ihe na-eme nyocha bụ ihe na-agbanwe agbanwe na-etinye ihe na-agbanwe agbanwe, nke nyocha, nnwale arụmọrụ, na nnwale na-enweghị ike, iji hụ na ha dị mma na arụmọrụ ha.
Ihe nlere
Astm a10 ígwè ígwè mezuru site na omume ahụhụ bụ ihe eji arụ ọrụ n'ọtụtụ ụlọ ọrụ dị iche iche, gụnyere:
- Mmanụ na Gas
- Ọgbọ
- Nhazi kemịkalụ
- petrochemical
- iwu
- Ndịtị
A na-emepụta ihe omume igwe na uru
Igwe ejiji nwere ike imepụta ihe siri ike na ọtụtụ uru, gụnyere:
- Akụ dị elu: A na - enwekarị akụrụngwa mmepụta dị elu: A na - enwekarị ihe mmepụta dị elu, na - ejide oke na arụmọrụ nke ASTM A106 ọkpọ ọkpọ.
- Njikwa siri ike: Omume steel nke siri ike na usoro mmepụta ọ bụla nke usoro mmepụta ọ bụla iji hụ na ASTM AS10 ígwè na-ezute ụkpụrụ kachasị elu.
Oge post: Mar-21-2024